Freight Rate Enquiry? Send a Range, Not a Form

Freight Rate Enquiry? Send a Range, Not a Form

Forwarders answer a bare freight rate enquiry with a 12-field form. The shipper never fills it in. Give a real range, ask one question, collect the rest.

Siti NabilahSiti NabilahLogistics
15 Nov 26
14m
Part of the series:WhatsApp for Delivery & Logistics: Real-Time Order Updates That Reduce Support Calls

"Rate for 1x40HC Port Klang to Jebel Ali?" That is the whole message. No commodity, no weight, no ready date, no incoterm. Most forwarders reply to a freight rate enquiry like this with a shipper information sheet: twelve fields the shipper has to fill in before anyone will put a number in front of them. The shipper does not fill it in. The enquiry dies at the first clarifying round, not at the quote.

The reply that keeps it alive does the opposite. It gives a real range for that lane, says what the range excludes, and asks one question. Everything else gets collected after the shipper has sent a second message.

Key Takeaway

A bare freight rate enquiry is a buying signal, and a twelve-field information sheet is a job. Shippers send enquiries to avoid jobs. Reply with a real range taken from your last quotes on that lane, state what it excludes, and ask one question that decides the quote. The shipper who answers that one question will answer the next five, and your desk quotes from a conversation instead of a form nobody returned.

Why does a freight rate enquiry die at the information sheet?

It dies because the shipper is asked to do work before they get anything back. A rate enquiry with no details is not laziness. It is a shipper testing whether you are the kind of forwarder who answers.

The numbers on this are old but blunt. When Freightos mystery-shopped the world's twenty largest forwarders with a straightforward LCL request from China to Chicago, only 45% of them produced a quote at all, the average time to get one was 90 hours, and several of the forwarders that did quote needed multiple conversations with the shipper first because the initial request did not give them enough information (FreightWaves, reporting the Freightos study).

90 hours
average wait for a quote from a top-20 forwarder on a plain LCL request

Read the last part again. The forwarders that failed were not short of rates. They were stuck in the clarifying round, and the clarifying round is where the shipper walks off.

Here is the part no rate-sheet guide will tell you. Across the sales inboxes we work with, the first reply we have seen get a second message gives a price range and then asks one question about what the customer is looking for. That pattern comes from service businesses selling on chat, not from freight desks. It transfers because the mechanics are identical: a cheap, clearly value-for-money answer gets the second message easily, and when the offer is not that cheap, the reply has to show what the price covers before it asks for anything.

The shipper form does neither. It gives no number and asks for twelve things.

Is it safe to quote a range before you know the cargo?

Yes, if the range is real and the exclusions are written down. A range is not a quote. It is a signal that you have rates on that lane this week and that you are worth a second message.

Three rules keep it honest:

The range comes from your last three to five quotes on that lane, not from a guess. If you have not quoted the lane this month, say so and give the lane you did quote.
The range names what it excludes in one line: local charges, DO fees, customs, DG surcharge, anything the shipper could later claim you hid.
The low end is a number you have actually sold. A low end you cannot deliver turns the second message into a complaint.

The fear most freight desks raise is being held to the low number. In practice a shipper holds you to a number you hid far harder than to a number you explained. The forwarder who wrote "roughly USD X to Y, excluding local charges, depending on ready date" and later quotes near Y has a conversation. The forwarder who sent a form and quoted Z two days later has a comparison, and the shipper has had two days to collect four other quotes.

45%
of the top 20 global forwarders produced a quote at all for a plain LCL request
A range is not a promotion

Never pad the low end to look cheap, and never invent a deadline to force the second message. If a carrier has a real promotional rate with a real expiry on that lane, say so with the date. If it does not, the range alone is enough. A shipper who catches a made-up low number does not come back for the real quote.

What should the first reply to a bare rate enquiry say?

Four parts, in this order: the range, the exclusion line, one question, and a sentence that says what happens after they answer. Keep it under five lines. The shipper is on a phone, between two other jobs.

Here is the shape for the Port Klang enquiry above. Bracketed values come from your own rate sheet.

Hi Mr Lim, thanks for the enquiry. 1x40HC Port Klang to Jebel Ali
is running roughly USD [low] to [high] ocean freight this week,
excluding local charges and destination DO.
 
Is the cargo ready to ship this month, or are you pricing ahead?
 
Once I know the ready date I can lock a sailing and send the
all-in within the hour.

The one question is the whole trick, so pick it on purpose. It should be the single answer that changes your quote the most, and it should be a choice, not an open field. "Ready this month or pricing ahead" is a choice. "Please provide commodity, weight, dimensions, incoterm, HS code and ready date" is a form wearing a sentence.

Which question depends on the mode:

Enquiry typeThe one questionWhy it goes first
FCL, lane givenReady to ship this month, or pricing ahead?Decides whether you chase a sailing or send indicative rates
LCL, lane givenRoughly how many CBM, under 5 or more?Decides whether LCL even makes sense versus a 20ft
Air, lane givenIs it general cargo or anything restricted?DG and batteries change the airline before the weight does
No lane, just "your rates?"Which lane do you ship most?Turns a rate-sheet request into one quotable lane
Regular shipper, new laneSpot shipment or a monthly run?A monthly run gets a contract conversation, not a spot price

Compare that to the standard approach:

Form-first replyRange-first reply
What the shipper receivesA request for 10 to 12 fieldsA number, an exclusion line, one question
Work asked of the shipperFill in a form before seeing any priceAnswer one question
Where the enquiry sits after 24hWaiting on shipperQuoted, or waiting on one known answer
What your desk learnsNothing until the form comes backReady date, then the rest, one message at a time
RiskShipper quotes four competitors in the meantimeA range you have to be honest about

Frequently Asked Questions

Reply with a real range for that lane taken from your recent quotes, one line stating what the range excludes, and one question that changes the quote the most, such as the ready date or the CBM. Collect the remaining details after the shipper replies. Do not send the full shipper information sheet as the first reply.
No, as long as the range comes from rates you have actually sold on that lane and the exclusions are written down. A range is an indication, not a quote. The risk is only in padding the low end to look cheap, which turns the second message into a complaint instead of a booking.
The first reply should go out the same hour, even if the full all-in quote takes longer. A Freightos mystery-shopper study found the average time to get a quote from a top-20 forwarder was 90 hours, and over half never quoted at all. A same-hour range reply beats a 90-hour perfect quote.
For an all-in quote you still need origin, destination, mode, commodity, weight, dimensions or CBM, incoterm and ready date. The point is the order you collect them in. Ask for the one that changes the price most in your first reply, and the rest once the shipper is already talking to you.
It can answer from a rate sheet you upload, give the lane range and the exclusion line, ask the one question, and fill the enquiry fields in your CRM from the chat. A human still issues the all-in quote and takes over the chat whenever the shipper asks something the sheet does not cover.

How to reply to a freight rate enquiry with no details

How to Reply to a Freight Rate Enquiry With No Details

Pull the lane range. Open your last three to five quotes on that origin and destination and take the low and high ocean or air freight you actually sold. If the lane has not been quoted this month, use the nearest lane and say so.
Write the exclusion line. One sentence naming what the range leaves out: local charges, destination DO, customs, DG surcharge. This is the line that protects the range later.
Pick the one question. Choose the single answer that moves your price most for that mode, and phrase it as a choice: ready this month or pricing ahead, under 5 CBM or more, general cargo or restricted.
Say what happens next. Close with what the shipper gets after they answer, with a time: "once I have the ready date I will send the all-in within the hour". Then send it inside the same hour the enquiry arrived.
Collect the rest in the chat. When the second message comes, ask for commodity, weight and incoterm two at a time, and write each answer into the enquiry record as it lands. Issue the all-in from the record, not from memory.
Follow up on a timer if the second message does not come. One nudge after 24 hours with something new, such as a sailing cut-off or a rate change on that lane, never "just checking in". Then move the enquiry to Quoted or Lost so it stops hiding in the inbox.

How does a CRM keep the range reply honest?

By making the range come from a sheet instead of a memory, and by writing the shipper's answers into fields as they arrive instead of into a chat nobody re-reads.

The honest range is only possible if someone can see what was last sold on that lane. On a small desk that knowledge lives in the head of whoever quoted it, and when that person is on leave the reply reverts to the form. A sales platform like Raion HUB fixes the first half by letting the AI chatbot answer from an uploaded rate sheet, a PDF or a spreadsheet, so the lane range and the exclusion line are the same whoever is on shift, including after 6pm when a Dubai importer is still at their desk.

The second half is the fields. As the shipper answers, the AI fills the enquiry's own fields from the chat: origin, destination, mode as a dropdown, ready date, commodity. Those fields are what the desk quotes from, and a dropdown like mode or trade lane can also decide who the enquiry is assigned to, so a sea freight enquiry lands with the sea desk and an air enquiry with the air desk. When a member accepts the enquiry, a follow-up sequence can start, with the 24-hour nudge set to send only if the shipper has not replied. A reply holds the next step until the chat goes quiet again.

What the platform does not do matters as much. It does not issue the all-in quote; that stays with a person who checks the sailing and the surcharges. It does not re-message a shipper who has gone silent on its own; the sequence is timed and visible, not improvised. And the AI never invents a rate. If the lane is not on the sheet, it says so and hands the chat to a human with an alert.

A six-person freight forwarder
Logistics
Port Klang, Selangor
Challenge

Rate enquiries from the website and a trade directory came in with a lane and nothing else. The desk replied with a shipper information sheet, and most enquiries were never heard from again. The ones that did reply did so after the shipper had quotes from elsewhere.

Solution

First reply became a lane range from the uploaded rate sheet, an exclusion line, and one question. Enquiry fields filled from the chat, sea and air enquiries assigned by mode, and a single 24-hour nudge only if the shipper had not replied.

Results
Every enquiry gets a number in the first reply
The desk quotes from fields, not from a form that never came back
Open enquiries visible on one board by last action date

What changes once the range goes first?

The Enquiry stage stops being a waiting room. Your pipeline for a rate enquiry has three places it can die: before you reply, between the reply and the quote, and after the quote goes out. We have written about the first in why slow quoting loses freight deals before they start, and about the third in where freight quotes die after they are sent. The middle one, the clarifying round, is the one the shipper information sheet creates and the range reply removes.

Two things happen on the desk. First, the quote gets written from a record, because every answer the shipper gave landed in a field, which also makes the all-in faster. Second, the enquiries that were never going to book show themselves early. A shipper who will not answer "ready this month or pricing ahead" was not going to fill in twelve fields either, and now you know in a day instead of a week.

The same shape works wherever a customer opens with a one-word enquiry. The first-reply pattern for "hi", "PM" and "price?" is the consumer version of the range reply. For the wider picture of how a logistics business runs its customer messaging from one place, from rate enquiry to delivery update, see the complete guide to WhatsApp for delivery and logistics.

The bottom line

Key Takeaway

A freight rate enquiry with no details is a shipper asking whether you answer. The shipper information sheet says no. A real range from your last quotes on the lane, one exclusion line, and one question that decides the price says yes, inside the hour, and gets the second message that the form never did. Collect the rest in the conversation, write it into fields, and let the all-in quote come from the record.

Ready to grow with Raion

Answer the rate enquiry before the carrier answers you.

Raion HUB reads the lane, cargo and ready date out of the first chat, fills your CRM fields, and keeps every open enquiry on one board your desk can see.